Domino Keypad

How to Set a Code in Keypad

Slide Switch (on inside control box) to “ON” or “PROGRAM”.
Press “ENTER”
Press “Your Code” (up to six digits)
Press “ENTER”
Slide Switch (on inside control box) to “OFF” or “OPERATE”
How to Use Keypad

Press “Your Code”
Press “ENTER”
If Old Code still seems to be working

WAIT 20 seconds
Try old code again …… It will not work
There is a 20 second time period built into the keypad that is activated after the correct code is entered. During this time period, any number followed by the “ENTER” button will activate the opener. This feature is useful when you need to quickly stop or reverse the door. Simply press the “ENTER” button.

How to Check Battery Life

Press the push button on control box, if it activates door – batteries do not need replacing
If red indicator light on keypad lights up when any number is pressed – batteries do not need replacing
If the above do not work and you are sure the batteries are good, make sure the batteries are firmly placed in the battery holder and connected correctly